14

Why are some films still shot in black and white or sepia? I can understand if it's perhaps a "period piece" like The Artist or The Good German, or if, like in Sin City, it's done to perhaps stay true to the source material. But movies such as the recent Frances Ha or La Haine have no such obvious requirements. Then there's Clerks.

So my question is, what would drive a director to choose to film in black and white? What qualities does shooting without colour lend to the film? Is it less expensive to shoot in black and white?

3
  • 2
    I see that this is related, but probably not an exact dupe. Dec 3, 2013 at 14:43
  • 1
    For nostalgic, historic or anachronistic effect.
    – Ankit Sharma
    Dec 3, 2013 at 16:47
  • 1
    cineuropa.org/… I don't want to devote a whole answer to this but here is an interview with Haneke about why he chose to make The White Ribbon in black and white instead of color.
    – Tony
    Dec 5, 2013 at 17:08

3 Answers 3

13

Clerks was shot in black and white for budgetary purposes, they just didn't have the money to film it in color.

Frances Ha was filmed digitally (Color) and in black and white, and was done in b&w to evoke reminisces of movies such as Woody Allen's Manhattan, or works by Truffaut.

I cannot find any references explaining why La Haine is in black and white, but considering that it was filmed during riots and contained other raw footage type scenes, it may have been both a budgetary and dramatic effect choice.

Originally, color film was available as early as the 1920's, however it was very expensive to work with, and as the development process was not very robust, colors could change depending on chemicals used and time exposed. Additionally, there were not very many cameras available that could utilize color film.

Technicolor developed a fairly consistent, robust development process in the 40's, and in the late stages of the decade was forced via anti-trust to license their process royalty free. This made color filming much more available and cost effective, and color slowly became cheaper than black and white.

Black and white is now more of an artistic choice. As stated by Roger Deakins (Principal photographer on The Man Who Wasn't There) in this article:

[Black-and-white] focuses you on the content and the story, and it really concentrates your attention on what's in the frame. All too often, color can be a distraction -- it's easier to make color look good, but harder to make color service the story. Black-and-white imagery is much more about the balance between the light and shade in the frame, and I think it can help convey story points a lot better with fewer distractions.

Lighting is not only about lighting; it's also about not lighting, and cutting light off of objects as much as shining light on them. Those kinds of considerations are as important in colour photography as they are in black-and-white, but the sheer beauty of a well-composed and well-lit black-and-white frame is hard to beat, because it's difficult to produce that type of focus and simplicity when you're shooting in color. It's vitally important to be able to separate shapes and surfaces through the use of light and shade, and to focus the audience's attention on what you want them to see. Color is seductive, but it's harder to get past the surface gloss to create a truly simple and relevant image. I almost wish every film were in black-and-white

Note: The above referenced article has quite a few links regarding use of black and white, including references to using it to distinguish between two worlds in a movie, (Such as Wizard of Oz, Purple Rose of Cairo), and statements by directors essentially that it evokes an other worldliness and/or nostalgia and memory.

With digital cameras and editing, the process can become easier and much less expensive, as there are programs and tools available to take a color image and convert to grayscale. There are two main methods, luminosity (assigns a shade of gray based on brightness of tone), and color altering which alters the colors themselves before the conversion. (There are only 256 shades of gray available, while modern color has over 16 million shades).

Modern cameras also have settings to mimic various types of black and white film, such as Afgapan (Afga was/is a German company that developed color methods around the same time as Eastman Kodak/Technicolor), Ilford and Kodak.

8
  • 1
    Thanks. But I'm hoping for information on what qualities those are. Is it simply imitating style? What does the director gain out of it if say, his audience has not seen any Truffaut or Manhattan? Also, what is cheaper about black and white: is it the film or the processing? How about with digital cameras? Dec 3, 2013 at 14:59
  • 1
    @coleopterist - Added details and information on color vs. black/white.
    – JohnP
    Dec 3, 2013 at 16:16
  • 1
    I understood Schindler's List was filmed in B&W to fully emphasize the scenes with the little girl wearing the red coat. It kind of stuck out like a sore thumb, which was exactly what Spielberg was trying to do ... truly emphasize what was going on in the death camps. Very powerful movie. Dec 3, 2013 at 21:17
  • 1
    This answer is excellent, but I have two corrections: shooting on color film is today and has always been more expensive than shooting on black-and-white film. After the 50s the cost of color came down dramatically, but not so much that it was cheaper than B&W. Color took over mainly because it was cheap enough to be affordable, and audiences so strongly preferred color that shooting B&W is commercially unviable for most mass-market films. Correction #2 is that there are infinite shades of gray, just as there are infinite shades of color. Any modern computer can do millions of shades of gray. Dec 5, 2013 at 2:57
  • One other film that was shot in B&W was my favorite film "Some Like It Hot". Allegedly, the reason this was done was because when Jack Lemmon and Tony Curtis had their makeup on, it came off with a greenish hue when shot in color, so it was decided to switch to B&W. Dec 18, 2013 at 12:36
9
+50

For low-budget independent films pre-2005 or so, the reason was often primarily budgetary. Until shooting digitally became a viable option, shooting black-and-white cost roughly a quarter what shooting in color cost, for the film stock itself and the processing. But that doesn't begin to cover all the additional savings you'd get by forgoing color film. Shooting on black-and-white you don't need color correction, nor do your lights need to be as numerous or as powerful (black-and-white film has a wider exposure range than color film does) and of course the makeup doesn't need to be anywhere near as good—just cake on the foundation and go. Even the sets don't need to be as large—things can fall into shadow, which would look weird in real life or in color, but doesn't seem odd in the already-unrealistic world of black-and-white. Across the board, everything can be done more cheaply (even slapdash-ly) and still look acceptable. Read some articles about all the cheats used in Hitchcock's Psycho and other horror films of the era and you'll get an idea of what kind of chicanery black-and-white made possible.

But of course such an important decision has a huge artistic component as well; black-and-white also needs to work for the story. For a good example of this, see Darren Aronofsky's Pi, apparently made for $60,000. That film used black-and-white reversal film, just about the cheapest film stock available (and used by students for that reason; unlike regular black-and-white film, it has a very narrow range of exposure). As Aronofsky himself says about his cinematographer Matty Libatique:

Matty was brave enough to take on Reversal film, which many of us shot in film school, and its black and white Reversal, extremely hard film stock to expose. We didn't want it to end up looking like "Clerks" and be all gray. We wanted it to be black or white. We were inspired by "Sin City" by Frank Miller -- he just does white scratches into black ink. Matty was a master of exposure. . . I can't tell you, we did three hundred feet of test. That's all we could afford. Three hundred feet of 16mm test, on a Bolex, which is absurd. We shot most of it on an Aaton. But then, Matty just nailed it, there was some reshooting, but I'd say 90% of his exposures were nailed, which is amazed. Like on paper, he's shooting newspaper on Reversal and to get the black black and the white white, I mean, if it's off half a stop, it's unusable.

Nowadays with consumer-level cameras (even cellphones) capable of shooting HD, it's far cheaper to shoot even high-quality digital video than it is to shoot on any kind of film, color or black-and-white. So any black-and-white film made after the mid-2000s (and any studio/high-budget film after the 1940s or so) was shot that way for purely artistic reasons. The references don't need to be so specific as Manhattan or Trauffaut; many modern black-and-white films are evoking the film noir movement (see the Coens' The Man Who Wasn't There) or simply the 1900s through 1940s in general.

Remember that our collective memory of 1900-1945ish is black-and-white, mostly through historical photographs and films from that era, so in some ways black-and-white (or moderately to extremely desaturated) feels more "authentic" to the period—for example, see Sky Captain and the World of Tomorrow. Finally a film may be shot in black-and-white (or 16mm or a specific film stock) to more closely match existing stock footage that the filmmakers want to integrate into the film: Goodnight, and Good Luck was shot in black and white so that period 1940s footage (such as of Joseph McCarthy) could be used in the film without it appearing jarring.

3
  • A current example is Nebraska, shot digitally but made black and white for release for artistic purposes.
    – matt_black
    Dec 18, 2013 at 21:17
  • Black and white film stock can be processed as either negative or reversal, with negative processing being slightly simpler (replace the fixing step that removes salts that haven't been reduced to metallic silver with a bleaching step that removes metallic silver but leaves the salts undisturbed, and then expose all of the film to light and develop it to convert all of the remaining salts to metallic silver). The cost savings from reversal film stems solely from the fact that the camera film can be directly viewed as a positive without having to be printed first. As for exposure latitude...
    – supercat
    Dec 3, 2020 at 21:37
  • ...the reason negative film is forgiving is that one can inspect the negative before having to decide how light or dark different parts should be printed. If one were to blindly print everything on a roll with the same exposure settings, the exposure latitude would be nowhere near as great.
    – supercat
    Dec 3, 2020 at 21:41
8

Some directors just like black and white movies and sometimes have ideas that seem to be better suited to B&W. It's usually an artistic choice, not for financial reasons.

Directors like Jim Jarmusch, Darren Aronofsky and Tim Burton actively choose, or sometimes insist that certain projects not be in color. Woody Allen shot Manhattan in B&W because “that’s how I remember it from when I was small. Maybe it’s a reminiscence from old photographs, films, books and all that. But that’s how I remember New York.”

I for one am glad we still get the occasional B&W movie. I love how good they can look.

1
  • Yeah I love black and white too. Partly because if a film is in black and white it is automatically "artistic" in my mind. Making some sort of statement. And I find it downright weird how amazing some shots look in black and white. There is a particular shot from Schindlers list which has stuck with me ever since I first saw it. I want to rewatch the film almost soley for that shot. Likewise with La Dolce Vita and Casablanca. Casablanca was the first movie which made me fully appreciate the phrase "silver screen": those scenes literally shine Feb 1, 2017 at 4:04

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .