Skip to main content
copyediting for clarity, conciseness, spelling, reduce redundancy
Source Link
wallyk
  • 4.8k
  • 2
  • 32
  • 47

Here is what a proffesionalprofessional actor says in an answer to a related question on Quora:

I am an accomplished actor and have had to do scenes where I have died, the first thing to do is to prepare for the shot, the director will tell just how long the camera will be focused on you. Before the shot you will be taken to the Make-upmakeup department to be made up to look like youryou are dead if this to be a scene that you are in a coffin at a funeral. 

As inan example when I did an episode of a murder show on ID Discovery and played a murdered victim where the camera would be focused on me for a period of time, when the director was ready for the shot Hehe would ask for a hand signal when I was ready in which I would take a deep breadth and then hold it and hold my position the. The director would the take the shot and film for about 40 to 45 seconds and then cut. In some cases the editor can also cheat a shot using a still image of you in position and your still image is matted into the scene where other actors are moving but you are not because your footage that was shot was now placed into the scene as a still shot. 

Another thing the is done with some actors when their death involves the eyes to be opened and since you are not really dead your eyes will sometimes blink while some actoractors can hold this for a few seconds, what’s done then is that the rest of the shot is live but the editor creates a still of only your face and then mattsmattes it back on to your face as a layer. There are many things that can be done in post production to accomplish this effect to make it look as real as possible.

Here is what a proffesional actor says in an answer to a related question on Quora:

I am an accomplished actor and have had to do scenes where I have died, the first thing to do is to prepare for the shot, the director will tell just how long the camera will be focused on you. Before the shot you will be taken to the Make-up department to be made up to look like your are dead if this to be a scene that you are in a coffin at a funeral. As in example when I did an episode of a murder show on ID Discovery and played a murdered victim where the camera would be focused on me for a period of time when the director was ready for the shot He would ask for a hand signal when I was ready in which I would take a deep breadth and then hold it and hold my position the director would the take the shot and film for about 40 to 45 seconds and then cut. In some cases the editor can also cheat a shot using a still image of you in position and your still image is matted into the scene where other actors are moving but you are not because your footage that was shot was now placed into the scene as a still shot. Another thing the is done with some actors when their death involves the eyes to be opened and since you are not really dead your eyes will sometimes blink while some actor can hold this for a few seconds, what’s done then is that the rest of the shot is live but the editor creates a still of only your face and then matts it back on to your face as a layer. There are many things that can be done in post production to accomplish this effect to make it look as real as possible.

Here is what a professional actor says in an answer to a related question on Quora:

I am an accomplished actor and have had to do scenes where I have died, the first thing to do is to prepare for the shot, the director will tell just how long the camera will be focused on you. Before the shot you will be taken to the makeup department to be made up to look like you are dead if this to be a scene that you are in a coffin at a funeral. 

As an example when I did an episode of a murder show on ID Discovery and played a murdered victim where the camera would be focused on me for a period of time, when the director was ready for the shot he would ask for a hand signal when I was ready in which I would take a deep breadth and then hold it and hold my position. The director would the take the shot and film for about 40 to 45 seconds and then cut. In some cases the editor can also cheat a shot using a still image of you in position and your still image is matted into the scene where other actors are moving but you are not. 

Another thing is done with some actors when their death involves the eyes to be opened and since you are not really dead your eyes will sometimes blink while some actors can hold this for a few seconds, what’s done then is that the rest of the shot is live but the editor creates a still of only your face and then mattes it back on to your face. There are many things that can be done in post production to accomplish this effect to make it look as real as possible.

deleted 1202 characters in body
Source Link
Napoleon Wilson
  • 59.3k
  • 65
  • 345
  • 674

In a movie, or single camera TV show, the shot never lingers long enough on the “dead” actor to give away the fact that they are faking it. By cutting away at the right time, the audience doesn’t have enough time to study the “corpse”.

Also, you will see that the DP frames the shot as a medium close up on the actor, instead of holding a wide master which would show the chest movement.

That being said, when playing dead, the best technique would be to take a deep breath in before “Action” and then slowly let your air out of your lungs (through the nose) during the shot. This will keep you still and your chest won’t be rising and falling. This is the same technique you use when you swim underwater.

One thing that you cannot control is the pulsating cartorid artery on the side of your neck. That pulse comes from your heartbeat. Sometimes you can see it in close ups of “dead” actors. With CG VFX though, the filmmakers can digitally fix that.

If you’re cast on a show where you are going to play dead, make sure that you avoid the coffee at craft service. The caffeine will make it very hard for you to relax, and your neck will be throbbing away, making it difficult to pull off the shot. Many actors get cast to play murder victims in procedural dramas, so these are some good techniques to keep in mind.

Here is what a proffesional actor says in an answer to a related question on Quora:

I am an accomplished actor and have had to do scenes where I have died, the first thing to do is to prepare for the shot, the director will tell just how long the camera will be focused on you. Before the shot you will be taken to the Make-up department to be made up to look like your are dead if this to be a scene that you are in a coffin at a funeral. As in example when I did an episode of a murder show on ID Discovery and played a murdered victim where the camera would be focused on me for a period of time when the director was ready for the shot He would ask for a hand signal when I was ready in which I would take a deep breadth and then hold it and hold my position the director would the take the shot and film for about 40 to 45 seconds and then cut. In some cases the editor can also cheat a shot using a still image of you in position and your still image is matted into the scene where other actors are moving but you are not because your footage that was shot was now placed into the scene as a still shot. Another thing the is done with some actors when their death involves the eyes to be opened and since you are not really dead your eyes will sometimes blink while some actor can hold this for a few seconds, what’s done then is that the rest of the shot is live but the editor creates a still of only your face and then matts it back on to your face as a layer. There are many things that can be done in post production to accomplish this effect to make it look as real as possible.

In a movie, or single camera TV show, the shot never lingers long enough on the “dead” actor to give away the fact that they are faking it. By cutting away at the right time, the audience doesn’t have enough time to study the “corpse”.

Also, you will see that the DP frames the shot as a medium close up on the actor, instead of holding a wide master which would show the chest movement.

That being said, when playing dead, the best technique would be to take a deep breath in before “Action” and then slowly let your air out of your lungs (through the nose) during the shot. This will keep you still and your chest won’t be rising and falling. This is the same technique you use when you swim underwater.

One thing that you cannot control is the pulsating cartorid artery on the side of your neck. That pulse comes from your heartbeat. Sometimes you can see it in close ups of “dead” actors. With CG VFX though, the filmmakers can digitally fix that.

If you’re cast on a show where you are going to play dead, make sure that you avoid the coffee at craft service. The caffeine will make it very hard for you to relax, and your neck will be throbbing away, making it difficult to pull off the shot. Many actors get cast to play murder victims in procedural dramas, so these are some good techniques to keep in mind.

Here is what a proffesional actor says:

I am an accomplished actor and have had to do scenes where I have died, the first thing to do is to prepare for the shot, the director will tell just how long the camera will be focused on you. Before the shot you will be taken to the Make-up department to be made up to look like your are dead if this to be a scene that you are in a coffin at a funeral. As in example when I did an episode of a murder show on ID Discovery and played a murdered victim where the camera would be focused on me for a period of time when the director was ready for the shot He would ask for a hand signal when I was ready in which I would take a deep breadth and then hold it and hold my position the director would the take the shot and film for about 40 to 45 seconds and then cut. In some cases the editor can also cheat a shot using a still image of you in position and your still image is matted into the scene where other actors are moving but you are not because your footage that was shot was now placed into the scene as a still shot. Another thing the is done with some actors when their death involves the eyes to be opened and since you are not really dead your eyes will sometimes blink while some actor can hold this for a few seconds, what’s done then is that the rest of the shot is live but the editor creates a still of only your face and then matts it back on to your face as a layer. There are many things that can be done in post production to accomplish this effect to make it look as real as possible.

Here is what a proffesional actor says in an answer to a related question on Quora:

I am an accomplished actor and have had to do scenes where I have died, the first thing to do is to prepare for the shot, the director will tell just how long the camera will be focused on you. Before the shot you will be taken to the Make-up department to be made up to look like your are dead if this to be a scene that you are in a coffin at a funeral. As in example when I did an episode of a murder show on ID Discovery and played a murdered victim where the camera would be focused on me for a period of time when the director was ready for the shot He would ask for a hand signal when I was ready in which I would take a deep breadth and then hold it and hold my position the director would the take the shot and film for about 40 to 45 seconds and then cut. In some cases the editor can also cheat a shot using a still image of you in position and your still image is matted into the scene where other actors are moving but you are not because your footage that was shot was now placed into the scene as a still shot. Another thing the is done with some actors when their death involves the eyes to be opened and since you are not really dead your eyes will sometimes blink while some actor can hold this for a few seconds, what’s done then is that the rest of the shot is live but the editor creates a still of only your face and then matts it back on to your face as a layer. There are many things that can be done in post production to accomplish this effect to make it look as real as possible.

Source Link
user67306
user67306

In a movie, or single camera TV show, the shot never lingers long enough on the “dead” actor to give away the fact that they are faking it. By cutting away at the right time, the audience doesn’t have enough time to study the “corpse”.

Also, you will see that the DP frames the shot as a medium close up on the actor, instead of holding a wide master which would show the chest movement.

That being said, when playing dead, the best technique would be to take a deep breath in before “Action” and then slowly let your air out of your lungs (through the nose) during the shot. This will keep you still and your chest won’t be rising and falling. This is the same technique you use when you swim underwater.

One thing that you cannot control is the pulsating cartorid artery on the side of your neck. That pulse comes from your heartbeat. Sometimes you can see it in close ups of “dead” actors. With CG VFX though, the filmmakers can digitally fix that.

If you’re cast on a show where you are going to play dead, make sure that you avoid the coffee at craft service. The caffeine will make it very hard for you to relax, and your neck will be throbbing away, making it difficult to pull off the shot. Many actors get cast to play murder victims in procedural dramas, so these are some good techniques to keep in mind.

Here is what a proffesional actor says:

I am an accomplished actor and have had to do scenes where I have died, the first thing to do is to prepare for the shot, the director will tell just how long the camera will be focused on you. Before the shot you will be taken to the Make-up department to be made up to look like your are dead if this to be a scene that you are in a coffin at a funeral. As in example when I did an episode of a murder show on ID Discovery and played a murdered victim where the camera would be focused on me for a period of time when the director was ready for the shot He would ask for a hand signal when I was ready in which I would take a deep breadth and then hold it and hold my position the director would the take the shot and film for about 40 to 45 seconds and then cut. In some cases the editor can also cheat a shot using a still image of you in position and your still image is matted into the scene where other actors are moving but you are not because your footage that was shot was now placed into the scene as a still shot. Another thing the is done with some actors when their death involves the eyes to be opened and since you are not really dead your eyes will sometimes blink while some actor can hold this for a few seconds, what’s done then is that the rest of the shot is live but the editor creates a still of only your face and then matts it back on to your face as a layer. There are many things that can be done in post production to accomplish this effect to make it look as real as possible.