9

I know when shooting on film, a light meter is used to determine the amount of exposure time for the film to get the right colours. Wikipedia also mentions they're used to to determine the optimum light level for a scene, however I'm not quite clear on why this would be required on digital films, as there is no film being exposed and you'd assume they could judge how much light is needed without exactly measuring the amount of light on screen (by looking at the scene once lit or watching the camera's output monitor).

Can anyone explain what exactly light meters would be needed for on a Movie or TV project not being shot on film?

3
  • 4
    Even digital cameras are limited by their design and the amount of available light. Better quality digital cameras do not use a fixed shutter or a digital approximation... en.wikipedia.org/wiki/The_Red_One_(camera)#The_Red_One like that little revolutionary gem, the recording process was digital, but getting the image to the sensor still required lenses and a variable aperture to create the right effect... true depth of field being one of the desired effects. Knowing what the light is exactly at the subject would be important.
    – Bon Gart
    Jul 16, 2014 at 20:51
  • 4
    Shooting a scene can sometimes take several days, or even several locations (e.g. Transformers 4 shot in Hong Kong, but also built a "Hong Kong" set in Detroit). Obviously one would want it to have the same "look". Recreating the lighting from the other day/location can be done much easier and faster if you use a light meter.
    – Oliver_C
    Jul 16, 2014 at 21:09
  • 4
    @BonGart and Oliver: These seem like good explanations. Why not put them up?
    – Walt
    Jul 20, 2014 at 22:54

1 Answer 1

2

A light meter is a device used to measure the amount of light. In photography, a light meter is often used to determine the proper exposure for a photograph.

Now why do you think that managing exposure is not needed in Digital Cinematography ?

Photography or Cinematography, Analog or Digital, it's all about managing the exposure.

In plainest terms, Exposure just means how much light is exposed to the picture and most pictures are either under exposed of over exposed. Under exposed means having a dark picture and over exposed means having more light than required. Good photography or cinematography is all about having just the right amount of light in your picture.

Most of the techniques in photography/cinematography deal with this very thing. Lens Filters do this very job of managing the exposure and this is applicable to both Digital and analog techniques.

Check any photography tutorial (analog/digital), they will tell you about how to manage the exposure.

when something is captured by a camera it goes to the sensor and that's where it is determined how the picture is going to be, depending on its exposure. It's a different story that whether The image or video goes to a film or an SD card.

Summing that up, what I want to say is Digital or Analog they all need to handle exposure. This is irrespective of whether the final output is going to a film or a digital media. And Light meter only tells the current amount of exposure, hence helping the folks to determine how much more they need to tweak the exposure.

P.S there are several techniques to tweak the exposure which are bith pre and post capture.

A few links : Exposure : Please go through the manual exposure part. It tells about light meter.

Also,

they could judge how much light is needed without exactly measuring the amount of light on screen (by looking at the scene once lit or watching the camera's output monitor).

That's really not so easy. You can't estimate the right amount of light just by looking at the output monitor. A huge amount of precision is required to determine the right exposure and we definitely need an instrument to help us determine that.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .